Reading a lash cluster tray: what the numbers actually control.

Every tray carries five numbers. Four of them mean the same thing at every supplier. The fifth one does not, and it happens to be the number buyers compare first. This is what each figure controls and how to check the one that is not standardised.

The five figures

What is printed on the tray, and what it decides.

01

The D number

How much lash is grouped into one fan. Higher number, fuller fan, heavier set. This is the number buyers compare and the one suppliers define differently.

02

Thickness in mm

The diameter of a single fibre, usually 0.05, 0.07, 0.10 or 0.15 mm. This decides how the set reads up close, independent of how full the fan is.

03

Length in mm

The range in the tray, written as 8-20mm or 10-24mm. A wider range gives a lash tech more to work with and more waste at both ends.

04

The curl letter

J, B, C, D are an escalation of curl. L and M are structured curls with a flat base, not points on the same scale.

05

Rows

How many rows of clusters sit on the tray. Useful for price comparison only after you know how many fans per row are usable.

The trap

Two trays labelled 60D are not always the same tray.

The D number is not standardised. Some suppliers use it to count how many individual lashes are grouped into one fan. Others use it as a density grade on a scale of their own. A few treat it as a marketing tier and move it when the photo needs to look fuller.

All three usages are common enough that a buyer cannot assume. That is not a reason to avoid the number, it is a reason to define it before you compare quotes. Ask one question: how many lashes are in one fan at this number, and how do you measure it.

A supplier who answers with a count and a method is comparable. A supplier who answers with the word full is not, and will not be at any price.

Label saysAsk before comparing
60DLashes per fan, and how it is measured
0.07mmSingle fibre diameter, not fan weight
10-24mmRange in the tray, and the waste at each end
D curlWhich curl scale, since DD is used loosely
12 rowsClusters per tray and usable fans after trimming

Curl letters

J to D is a scale. L and M are a different idea.

The common mistake is treating all six as points on one line.

CurlWhat it does
JThe flattest curl. Reads as a natural lash and disappears on clients who already have a slight lift.
BA gentle lift. Popular where C looks too made-up in daylight.
CThe default. Opens the eye without looking like a set was applied.
DThe strongest of the standard curls. Photographs well, reads dramatic at close range.
LA straight base that lifts at the tip. Used on inner corners and on hooded eyes.
MA flat base with a sharper angle than L. Same job, more definition at the root.

Costly habits

Three spec mistakes that cost more than the price difference.

Comparing on the D number alone

A 60D from one supplier and a 60D from another are not always the same amount of lash. If the number is not defined the same way, the comparison is between words, not products.

Ignoring thickness because the fan looks full

A full fan at 0.10mm feels heavy on a fine natural lash; the same fullness at 0.05mm does not. Buyers who only read the D number are choosing weight without noticing.

Pricing per tray instead of per usable fan

Short rows at both edges are common and rarely counted. Asking how many fans are usable after trimming changes the ranking of quotes more often than asking for a discount does.

Applied

How the same spec reads on a real tray.

Take one of our cluster kits as an example: 12 rows, 0.07mm, 10-24mm, D curl, 200D to 60D across the book, with bottom lash segments in the same tray.

Read straight: the fibre is fine enough to wear as a full set, the length range covers a natural and a lifted look from one book, and the density changes across the tray so a lash tech can build a set without opening a second one. The bottom segments are there because a stylist who wants a defined lower line otherwise has to buy a second product.

Every one of those points is a decision you can ask about, which is the whole purpose of the spec. A tray that cannot answer them is a tray you are buying on a photo.

SpecWhat it means in use
0.07mmWearable as a full set
10-24mmNatural to lifted from one book
D curlDefined, photographs well
200D to 60DDensity varies across the tray
Bottom segmentsNo second product for the lower line
12 rowsRoughly one full set per book

Questions

What buyers ask about cluster specs.

What does 200D mean on a lash cluster tray?

It describes how much lash is grouped into a single fan, but the scale is not standardised across suppliers. Some use it as a count of individual lashes per fan, others as a density grade, and a few use it as a marketing tier. Ask your supplier what their number measures before you compare it to anyone else's.

What is the difference between D curl and DD curl?

D is a standard curl in the J-B-C-D escalation. DD is not a separate curl in that scale; suppliers use it to mean either a slightly stronger D or a double-drawn fibre. When a listing says DD, ask which of those two it means, because the answer changes both the look and the price.

Which thickness should I stock for retail customers?

0.07mm is the usual middle: full enough to read as volume, light enough to wear as a whole set. 0.05mm suits customers with fine natural lashes and a preference for a soft result. 0.10mm and above is a deliberate, heavier look, and it sells to a narrower group.

How many clusters are in a 12 row tray?

It depends on the cluster width, so a row count alone will not tell you. Ask for the cluster count per tray rather than the row count, then ask how many of those are usable after trimming the edges. Those two numbers together are what you are buying.

Does a wider length range cost more?

It moves the cost rather than raising it. A 10-24mm tray takes more handling than an 8-16mm tray, but it also produces more short pieces that a lash tech will not use. Compare the price per usable fan across the whole tray, not the headline price.

Can I get one tray with two curls in it?

Yes, and it is common on manga and spiky styles where a mixed tray lets a lash tech build a full set from one book. Ask whether the mix is fixed or whether you can choose the ratio, because a fixed 70/30 split may not match how your customers actually work.

Next step

Send the spec you are working to. We will read it back.

Or send a photo of the tray you want to match. We will tell you which figures we can hold and which ones move between lots, before you order anything.